Configuration selection

Product advantages

Product Description

GENERATOR SET TECHNICAL PARAMETERS
Model:	HLC800GF	Voltage Regulation:	≥±5%
Prime Power (KVA/KW):	1000/800	Voltage Regulation, Stead State:	≤±1%
Standby Power (KVA/KW):	1100/880	Sudden Voltage Warp:	≤+25%
Rated Current (A):	1440	Sudden Voltage Warp:	≤-20%
Power Factor (COSΦ):	0.8 lagging	Voltage Stable Time:	≤6S
Rated Frequency:	50Hz	Voltage unbalance:	≤1%
Starting Method:	24V DC start	Frequency Regulation, Stead State:	≤5%
Dimensions (mm):	4100×1500×2100	Fr equency Waving:	≤1.5%
Weight (kg):	7500	Frequency Recovery Time:	≤5S
DIESEL ENGINE DATA
Brand:	Cummins	Compression Ratio:	13.9:1
Model:	KTA38-G5	Fuel Consumption Rate (g/kwh):	208
Rate Power (kw):	880	Rated Speed:	1500/RPM
Standby Power (kw):	970	Air Intake System：	Turbocharger
Number of Cylinders:	12	Type:	Four-stroke、Direct injection
Displacement (L)：	37.8	Cooling Mode：	Closed water cooling
Bore/Stroke (mm):	159/159	Start Mode：	Electric starting
ALTERNATOR DATA
Brand:	HAOLIAN	Power Factor (COSΦ):	0.8 Lagging
Model:	HL-800	Insulation Class:	H
Rated Power (KVA):	1000	Protection Class:	IP22 IP23
Rated Voltage (V):	400/230	Voltage Regulation Method:	AVR (Automatic Regulation)
Number of bearing:	1	Wiring Method:	3 phase and 4 wires,"Y" type connecting

Please note：

1. Alternators can be selected according to the needs of customers are Haolian, Stanford, Leroy- Somer, Marathon and other famous brands.

2. The specifications may change without the notice.

FAQs Related to Cummins 800kW Diesel Generator Set：

Q: What is the basic maintenance cycle of the Cummins 800kW diesel generator set? What are the key maintenance focuses for core components?

A: The basic maintenance cycle is based on operating hours, with routine inspections (e.g., filter replacement, fluid testing) usually conducted every 500 hours. For core components (such as the KTA38-G5 engine block and turbocharger), focus on lubrication status and wear, and replace special oil and filters regularly according to the manual.

Q: What fuel type does the unit require? Can it adapt to diesel of different qualities?

A: It is compatible with 0# diesel (ambient temperature) and -10#/-20# diesel (low-temperature environments). Equipped with a high-efficiency filtration system (fuel filter, oil-water separator) to reduce impurity impact, it can adapt to standard-compliant diesel, but clean fuel is recommended to extend component life.

Q: What are the basic requirements for ventilation and load-bearing of the installation site during unit operation?

A: The installation site requires natural or forced ventilation with ≥3 air exchanges per hour to avoid heat accumulation. The foundation load-bearing capacity must be ≥1.2 times the total unit weight (including fuel tank). A concrete foundation with reserved shock absorption space is recommended to ensure stable operation.