SDEC 120kw Diesel Generator Set
The SDEC 120kW diesel generator set, as a medium-power generation equipment, is widely used in industrial, commercial and emergency power supply fields. Typically equipped with a four-stroke diesel engine as the power source, it has an output voltage of 380V/400V and a frequency of 50Hz, meeting the needs of most three-phase electrical equipment. However, this is only the conventional configuration; if you need single-phase electricity or 230V, please inform the customer service staff to note it for you.

| Configuration selection |
| Product advantages |
| Product Description |


| GENERATOR SET TECHNICAL PARAMETERS | |||
| Model: | HLS120GF | Steady-State Voltage Regulation: | ≤ ±0.5% |
| Prime Power (KVA/KW): | 150/120 | Transient Voltage Regulation: | ≤ ±15% |
| Standby Power (KVA/KW): | 165/132 | Voltage Fluctuation Rate: | ≤ ±0.5% |
| Rated Current (A): | 216 | Voltage Waveform Distortion: | ≤ 8% |
| Power Factor (COSΦ): | 0.8 lagging | Voltage Recovery Time: | ≤ 1.5 sec |
| Rated Frequency: | 50Hz | Steady-State Frequency Regulation: | ≤ 3% |
| Starting Method: | 24V DC start | Transient Frequency Regulation: | ≤ ±5% |
| Dimensions (mm): | 2400*940*1376 | Frequency Recovery Time: | ≤ 3 sec |
| Weight (kg): | 1250 | Frequency Fluctuation Rate: | ≤ ±0.5% |
| DIESEL ENGINE DATA | |||
| Brand: | SDEC | Compression Ratio: | 17.3:1 |
| Model: | 6HTAA6.5-G32 | Fuel Consumption Rate (g/kwh): | 192 |
| Rate Power (kw): | 140 | Rated Speed: | 1500/RPM |
| Standby Power (kw): | 155 | Air Intake System: | Turbocharger |
| Number of Cylinders: | 6 | Type: | Four-stroke、Direct injection |
| Displacement (L): | 6.5 | Cooling Mode: | Closed water cooling |
| Bore/Stroke (mm): | 105/124 | Start Mode: | Electric starting |
| ALTERNATOR DATA | |||
| Brand: | HAOLIAN | Power Factor (COSΦ): | 0.8 Lagging |
| Model: | HL-120 | Insulation Class: | H |
| Rated Power (KVA): | 150 | Protection Class: | IP22 IP23 |
| Rated Voltage (V): | 400/230 | Voltage Regulation Method: | AVR (Automatic Regulation) |
| Number of bearing: | 1 | Wiring Method: | 3 phase and 4 wires,"Y" type connecting |




A: Yes, but you need to communicate with customer service in advance to confirm compatibility.
A: No special restrictions; just inform customer service of your needs in advance for notation.
A: Equipped with an intelligent controller, the automatic start-stop function enables fast emergency response.
EN
AR
CS
NL
FR
DE
IT
JA
KO
PL
PT
RU
ES
UK
TH
TR









